 |
|
 Home
Products
Store
Forum
Warehouse
Contact Us
|
|
|
|
This topic comprises 2 pages: 1 2
|
|
Author
|
Topic: WD-40 on bearings??????
|
John Pytlak
Film God
Posts: 9987
From: Rochester, NY 14650-1922
Registered: Jan 2000
|
posted 11-06-2001 07:04 AM
Randy - Xe-Kote does have a very small amount of a hard wax lubricant, intended for lubricating film. But it would be totally ineffective as a bearing lubricant. If you use Xe-Kote as a degreaser, be sure to relubricate the bearing, even if you intend to replace it within a few days. Without lube, the bearing could seize very quickly and unexpectedly.------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Research Labs, Building 69, Room 7525A
Rochester, New York, 14650-1922 USA
Tel: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion
| IP: Logged
|
|
|
|
|
|
All times are Central (GMT -6:00)
|
This topic comprises 2 pages: 1 2
|
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2
The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion
and agrees to release the authors from any and all liability.
|
|
|
|
Printer-friendly view of this topic