Film-Tech Forum ARCHIVE: Reverse Scan Readers

my profile | my password | search | faq & rules | forum home

»	Film-Tech Forum ARCHIVE » Operations » Film Handlers' Forum » Reverse Scan Readers (Page 2)

This topic comprises 2 pages: 1 2

Author

Topic: Reverse Scan Readers

Sam D. Chavez
Film God

Posts: 2153
From: Martinez, CA USA
Registered: Aug 2003

posted 04-01-2004 09:54 AM

Thank you for the offer of help. It seems the V10 has the solar cell mounting block in the same position as the V4 (2 O'clock) vs the 3 O'clock position for the V5/V8. However, it is raised off the casting higher so I can't use my V4 LED assembly without making the riser plate a bit shorter.

| IP: Logged

Kenneth Wuepper
Phenomenal Film Handler

Posts: 1026
From: Saginaw, MI, USA
Registered: Feb 2002

posted 04-01-2004 10:08 PM

Sam,
The reader post is located at the 2 o'clock position. Since there are some locator pins into the casting I will send you the old photocell mounting brackets so you can measure them.

The split cells are mounted in custom made brackets which fit where the old brackets attached. It was necessary to remove the locator pins to make this modification work.

KEN

| IP: Logged

All times are Central (GMT -6:00)

This topic comprises 2 pages: 1 2

Printer-friendly view of this topic

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.