Film-Tech Forum ARCHIVE: Christie Filmgate Adjustment

my profile | my password | search | faq & rules | forum home

»	Film-Tech Forum ARCHIVE » Operations » Film Handlers' Forum » Christie Filmgate Adjustment (Page 2)

This topic comprises 2 pages: 1 2

Author

Topic: Christie Filmgate Adjustment

Mark Gulbrandsen
Resident Trollmaster

Posts: 16657
From: Music City
Registered: Jun 99

posted 07-25-2004 12:15 AM

"No, this would not be a tool-box item."

No, its an in the van tool that resides near the small arbor press that I also carry and weighs about the same as the press does.
There are very few dealers out there with a complete shop, but there are a few. We just added a 13X48 lathe to our arsenal of machine tools primarily to produce our own lens bushings for the DP-70's. Even the new Kinoton produced bushings are pretty bad. We plan on going right down to 70.6 mm with just the single piece bushing. One run of 40 bushings pays for the cost of the lathe.

Mark

| IP: Logged

All times are Central (GMT -6:00)

This topic comprises 2 pages: 1 2

Printer-friendly view of this topic

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.