 |
|
 Home
Products
Store
Forum
Warehouse
Contact Us
|
|
|
|
This topic comprises 2 pages: 1 2
|
|
Author
|
Topic: manuals of Barco DP3000 / Electrical supply
|
Juan Jose Garcia Calvo
Film Handler
Posts: 64
From: Pedrajas de San Esteban, Spain
Registered: May 2003
|
posted 11-12-2011 07:10 PM
I've got it!!!
Thank you very much, Steve. That's what I was looking for.
In the service manual, I just saw that it's so easy change 3x400+N into 3x240V.
There is a 4 ways filter before the 3 units LVS. These LVS must have a 240V input (monophase) each. The wiring for the 3x400+N supply is a star configuration in the filter output (the LVS input are connected to N&L1, N&L2 and N&L3, so, each receive 240V), and it would be changed into a triangle configuration (each LVS input connected L1&L2, L2&L3, and L1&L3, and N line unused) to use a 3x240V.
I'm not sure, but I think you can even use a 240V single phase power net.
Problem solved!!
Thank you everybody!!!
JuanJo
| IP: Logged
|
|
|
|
All times are Central (GMT -6:00)
|
This topic comprises 2 pages: 1 2
|
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2
The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion
and agrees to release the authors from any and all liability.
|
|
|
|
Printer-friendly view of this topic