|
|
This topic comprises 2 pages: 1 2
|
|
Author
|
Topic: Change volume to a dolby processor from Sony projector
|
|
|
Carsten Kurz
Film God
Posts: 4340
From: Cologne, NRW, Germany
Registered: Aug 2009
|
posted 09-14-2015 04:41 PM
If the connection works, format and volume cues show up automatically in the Sony cuelist. If they do not show up, the connection doesn't work. Per default, the SRX-R510/515 have CP750 cntrol over ethernet enabled in the INI file.
So all that's needed should be to have the CP750 on the same subnet as the Control-Port of the S10 server, properly cabled, and have the right CP750 IP configured in network config dialog on the S10. And of course, first time, reboot the S10, it want's to see the CP750 at boot time.
- Carsten
| IP: Logged
|
|
|
|
Hakan Bicer
Film Handler
Posts: 46
From: eskisehir , merkez ,Turkey
Registered: Feb 2013
|
posted 05-03-2016 09:52 AM
we must add these line to SMSMgrServer_custom.ini file
#Audio processor control
com.sony.dcinema.serial.impl.AudioDeviceManagerImpl.audioProcessorClassPath=com.sony.dcinema.serial.impl.CP750Control
com.sony.dcinema.serial.impl.CP750Control.defaultVolume=7
com.sony.dcinema.sms.messages.MsgBodyGPIOControlList.CP750VolumeList=3,3.5,4,4.5,5,5.5,6,6.5,7
com.sony.dcinema.serial.impl.CP750Control.connection=Ethernet
com.sony.dcinema.serial.impl.CP750Control.ethernetTimeout=1
| IP: Logged
|
|
Carsten Kurz
Film God
Posts: 4340
From: Cologne, NRW, Germany
Registered: Aug 2009
|
posted 05-03-2016 03:07 PM
No, Hakan, you don't.
At least if these settings have not been changed before by the installer. CP750 control via Ethernet is the preconfigured default on the Sony 510/515. All you need to do is to configure the CP750 IP address in the 510/515 network setup (GUI). The CP750 volume cues will then show up in your cues list (if the CP750 is powered on).
These original settings are set in the SMSMgrServer.ini, and can/need to be overriden if needed in the SMSMgrServer_custom.ini
ABSOLUTELY NEVER touch the SMSMgrServer.ini, only use SMSMgrServer_custom.ini for changes to the default config!
A standard 510/515 has these settings active in the SMSMgrServer.ini:
---
com.sony.dcinema.serial.impl.AudioDeviceManagerImpl.audioProcessorClassPath=com.sony.dcinema.serial.impl.CP750Control
com.sony.dcinema.serial.impl.CP750Control.defaultVolume=5.8
com.sony.dcinema.sms.messages.MsgBodyGPIOControlList.CP750VolumeList=0.5,1,1.5,2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5,8,8.5,9,9.5,10
com.sony.dcinema.serial.impl.CP750Control.connection=Ethernet
com.sony.dcinema.serial.impl.CP750Control.ethernetTimeout=1
----
The easiest way to get a grip on these settings is to create a full log - it will contain all system config files, including these two INIs, and you can easily open them on a standard PC using notepad, etc. to have a look at both INI files. Then you can educate yourself about which settings need to be changed in the custom.ini.
Then add them on the Sony using vi.
- Carsten
| IP: Logged
|
|
|
|
All times are Central (GMT -6:00)
|
This topic comprises 2 pages: 1 2
|
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2
The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion
and agrees to release the authors from any and all liability.
|
Home
Printer-friendly view of this topic