Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Digital Cinema Forum   » Flickering on the picture (Page 2)

 
This topic comprises 2 pages: 1  2 
 
Author Topic: Flickering on the picture
Mark Gulbrandsen
Resident Trollmaster

Posts: 16657
From: Music City
Registered: Jun 99


 - posted 09-08-2016 09:37 PM      Profile for Mark Gulbrandsen   Email Mark Gulbrandsen   Send New Private Message       Edit/Delete Post 
Also, your exhaust blower install looks ok. Just as long as the room temp doesn't go much above 85 degrees f., you should be fine...

Mark

 |  IP: Logged

Leo Enticknap
Film God

Posts: 7474
From: Loma Linda, CA
Registered: Jul 2000


 - posted 09-08-2016 09:49 PM      Profile for Leo Enticknap   Author's Homepage   Email Leo Enticknap   Send New Private Message       Edit/Delete Post 
In Wales, that is very unlikely to happen! Typical daytime temperatures in most of the UK range from the low 40s to the mid-70s, depending on the time of year. I worked in several British cinemas that had no ducted air extraction from the lamphouses whatsoever. In one during the winter, the booth was unbearably cold unless the projector lamps were on.

 |  IP: Logged

Manny Montes
Master Film Handler

Posts: 270
From: United States
Registered: Feb 2010


 - posted 09-10-2016 12:16 AM      Profile for Manny Montes   Email Manny Montes   Send New Private Message       Edit/Delete Post 
Leo,
I worked in a cinema like that but it had no insulation for the projection booth so you would freeze up there if you weren't huddled near the lamphouse.

 |  IP: Logged

Mark Gulbrandsen
Resident Trollmaster

Posts: 16657
From: Music City
Registered: Jun 99


 - posted 09-11-2016 09:15 AM      Profile for Mark Gulbrandsen   Email Mark Gulbrandsen   Send New Private Message       Edit/Delete Post 
It depends Leo. In a closed in area that's a lot of BTU that will build up fairly quickly. Not all modern booths have windows that can be opened for ventilation. I had one customer that is in Montana which sees temps similar to what you might see in Whales. His ICP board over heated on two occasions. Luckily that does not stop a show, but it does cause the NEC to throw an alarm. He just finished updating his entire HVAC system in the building and now the projector runs at much happier temps.

Mark

 |  IP: Logged



All times are Central (GMT -6:00)
This topic comprises 2 pages: 1  2 
 
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.