Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Ground Level   » roof leaks (Page 2)

 
This topic comprises 2 pages: 1  2 
 
Author Topic: roof leaks
Brandon Willis
Expert Film Handler

Posts: 216
From: Richmond, VA, USA
Registered: Apr 2004


 - posted 08-18-2004 11:08 PM      Profile for Brandon Willis   Email Brandon Willis   Send New Private Message       Edit/Delete Post 
quote:
I've seen water cascading down the inside of a wall (like a waterfall) bleeding through drywall from the other side, causing it to crumble like wet newspaper right before your eyes!
I've seen something similar. A couple of us were sitting in the accounting office one night after a big storm when we heard water pouring. We looked around to see where it was coming from, and saw it streaming down the wall. Right at that moment the monitor for the security cameras went dark.

 |  IP: Logged

Bill Enos
Film God

Posts: 2081
From: Richmond, Virginia, USA
Registered: Apr 2000


 - posted 08-19-2004 12:37 AM      Profile for Bill Enos   Email Bill Enos   Send New Private Message       Edit/Delete Post 
I thought we had it bad, but at our worst last summer it wasn't as bad as some of these stories. The 10 foot high 88 foot long trusses spanning width of the building give us an attic high enough to walk in and check for leaks regularly during rain and snow melts, necessary even with the new roof.

 |  IP: Logged

Brandon Willis
Expert Film Handler

Posts: 216
From: Richmond, VA, USA
Registered: Apr 2004


 - posted 08-20-2004 12:21 AM      Profile for Brandon Willis   Email Brandon Willis   Send New Private Message       Edit/Delete Post 
They put a new roof on the Ridge, only to close it down a few months later.

 |  IP: Logged

Bill Enos
Film God

Posts: 2081
From: Richmond, Virginia, USA
Registered: Apr 2000


 - posted 08-20-2004 07:34 AM      Profile for Bill Enos   Email Bill Enos   Send New Private Message       Edit/Delete Post 
At least the workers gutting the place were dry.

 |  IP: Logged

Dean Kollet
Jedi Master Film Handler

Posts: 591
From: Florida State University
Registered: Jul 2003


 - posted 08-29-2004 01:32 AM      Profile for Dean Kollet   Email Dean Kollet   Send New Private Message       Edit/Delete Post 
quote: Bill Enos
This thread is testimony to what architects just don't seem to understand, and that everybody else does, that is no matter what they're made of flat roofs always leak.
why don't they built slanted roofs on theatres? it can't cost THAT much more. I know there has to be room for huge A/C systems and whatnot, but why with all the money they get do they still build stuff that leaks so easily?

 |  IP: Logged

Bryan J Arseneau
Film Handler

Posts: 10
From: Toronto, ONTARIO, CANADA
Registered: Aug 2003


 - posted 08-29-2004 03:55 AM      Profile for Bryan J Arseneau   Email Bryan J Arseneau   Send New Private Message       Edit/Delete Post 
During the opening weekend of The Corporation a small piece of plaster fell from the front of the house.
Here we are with 800 people in the house and a patron comes up to let me know that a piece of the ceiling has fallen. The piece is about 3.5 inches by 4 inches.
Now this happened just after the collapse of the uptown theatre in Toronto so the city is in a scared mode , so the Bloor is shut down for 2 months.
They have to have structural assessments done they have to have HVAC assessed.
They are now re opened with a new ceiling.
We are talking abut a cinema built in 1941, and one of the nicest rep houses in Toronto.
Every time I run The Coronation in Toronto I tell the theatre I am Not responsible for the ceiling [beer]

 |  IP: Logged

Jacob Szewczyk
Film Handler

Posts: 18
From: Olney, Maryland, USA
Registered: Jun 2004


 - posted 08-29-2004 04:56 PM      Profile for Jacob Szewczyk   Email Jacob Szewczyk   Send New Private Message       Edit/Delete Post 
A few years ago, we had a tornado which caused some leaks in the booth. One of the leaks was over the top decj of one of our platters. Since this was after we were closed, we didn't discover the leak till the next day, which was too late for our copy of 'Shrek', which got totally destroyed. We also have a leak over the top decks of 2 of our other platters, but we discovered those before they could do too much damage.

 |  IP: Logged

Gary Crawford
Expert Film Handler

Posts: 200
From: Neptune NJ USA
Registered: Nov 2003


 - posted 08-31-2004 02:07 PM      Profile for Gary Crawford   Email Gary Crawford   Send New Private Message       Edit/Delete Post 
Like was mentioned above, there weren't many theaters that DIDN'T have roof leaks. All those old places in Asbury Park NJ, the last one built in 1929, all had flat roofs that did leak sooner or later. Soon major, some minor, but they all leaked.

Our theater, the Beach Cinema (formerly The Palace) in Bradley Beach NJ was a 4/12 wooden truss roof. I really don't know if it was original. If not, it was added a long time ago. That roof is okay (except when the gutters pack with leaves in the fall) and I have two little leakers in the booth. An old skylight drips sometimes, and if the wind is right I'll get some rain down the old fire fan opening, but not all the time. Of course, the fire fan is right above Machine #1.

 |  IP: Logged

Brandon Willis
Expert Film Handler

Posts: 216
From: Richmond, VA, USA
Registered: Apr 2004


 - posted 09-02-2004 10:54 AM      Profile for Brandon Willis   Email Brandon Willis   Send New Private Message       Edit/Delete Post 
The heavy storms this area had this past week worsened our existing leaks, and opened up a few new ones. We now have about 4 leaks in front of our indoor box office, a couple in the auxiliary lobby, and leaks in almost all of the auditoriums in the older section of the building. There's also a few new leaks in the booth, one of which is directly over top of a lamphouse. We're working on getting someone up there to take care of it soon.

 |  IP: Logged



All times are Central (GMT -6:00)
This topic comprises 2 pages: 1  2 
 
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.