Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Ground Level   » How far do you dim the lights and when? (Page 2)

 
This topic comprises 2 pages: 1  2 
 
Author Topic: How far do you dim the lights and when?
Mike Blakesley
Film God

Posts: 12767
From: Forsyth, Montana
Registered: Jun 99


 - posted 02-01-2006 11:36 AM      Profile for Mike Blakesley   Author's Homepage   Email Mike Blakesley   Send New Private Message       Edit/Delete Post 
I used to cue the houselights to come up to half as soon as the credits began to roll, but someone on here suggested that if the director's name comes first in the end-credits, to leave the lights off until that name has faded, out of respect for the director. And in any case, to leave the lights off until the credits have actually taken over the screen. So that's what I do here.

 |  IP: Logged

Anslem Rayburn
Master Film Handler

Posts: 476
From: Yuma, AZ, USA
Registered: May 2002


 - posted 02-01-2006 12:47 PM      Profile for Anslem Rayburn   Email Anslem Rayburn   Send New Private Message       Edit/Delete Post 
We bring the lights up after the credits are on screen, slowly fading up over a 7 second span.

The other theater in town has started doing this now, too. Before, they went from off to full blast in a fraction of a second. Very startling to your vision, to say the least.

Cleaning lights are not used during business hours, unless we are looking for something lost, and only then in between shows.

Lighting is just one of the reasons I would love to have 20 minutes in a windowless room with the yahoo who designed this building. It's nice to look at, but it's functionality is lacking in many ways with regards to customer flow, etc.

 |  IP: Logged

Phil Blake
Jedi Master Film Handler

Posts: 558
From: esperance western australia
Registered: Nov 2003


 - posted 02-05-2006 04:01 AM      Profile for Phil Blake   Author's Homepage   Email Phil Blake   Send New Private Message       Edit/Delete Post 
Normal setting are all lights start at 80%
dim to 60% for ads dim to 30% trailers full down for feature

lights up settings at end credits , wall lights up 30% pause house lights to 30% pause wall lights to 60% pause house lights to 60% pause all lights to 80%

However there are times when I find myself varying lighting setting on accordance with the show.
for instance with narnia , the show ended , credits roll , then stop last scene of the film plays thenthe credits roll again.
my first setting was to bring lights up 30% at the start of credits , customers complained they wanted lights down for than last scene of the film.
my second setting was to keep lights down until the final part of the credits rolled, this resulted in customers falling over in the dark while trying to exit.my third setting was the bring up the side wall lights to 30% only at the start of the firtst credits then bring all house lights up to 60% at the start of the second credits. this worked all parties were happy.

 |  IP: Logged

Dieter Depypere
Master Film Handler

Posts: 343
From: Deutsch-Wagram, Lower Austria, Austria
Registered: May 2005


 - posted 02-05-2006 09:59 AM      Profile for Dieter Depypere   Email Dieter Depypere   Send New Private Message       Edit/Delete Post 
During the slideshow, trailers and credits 50%, in the pause full and during the feature dark. Light is dimmed manually with a big potentiometer.

 |  IP: Logged

Anslem Rayburn
Master Film Handler

Posts: 476
From: Yuma, AZ, USA
Registered: May 2002


 - posted 02-08-2006 05:08 AM      Profile for Anslem Rayburn   Email Anslem Rayburn   Send New Private Message       Edit/Delete Post 
Was reading on another forum about privacy, and decided to put my name in Google. This thread came up as first :

Google search for 'Anslem Rayburn'

Just thought it was funny, and it directly links to this thread...

 |  IP: Logged



All times are Central (GMT -6:00)
This topic comprises 2 pages: 1  2 
 
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.