Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Community   » Film-Yak   » Which Wi-Fi access point has the best range? (Page 2)

 
This topic comprises 2 pages: 1  2 
 
Author Topic: Which Wi-Fi access point has the best range?
Steve Guttag
We forgot the crackers Gromit!!!

Posts: 12814
From: Annapolis, MD
Registered: Dec 1999


 - posted 07-30-2012 05:48 PM      Profile for Steve Guttag   Email Steve Guttag   Send New Private Message       Edit/Delete Post 
So you just want to plunk it down and not care where you are in the building. That is something I don't normally do...it moves with me as I don't normally network things until the end.

Good luck.

 |  IP: Logged

Brad Miller
Administrator

Posts: 17775
From: Plano, TX (36.2 miles NW of Rockwall)
Registered: May 99


 - posted 07-31-2012 12:36 AM      Profile for Brad Miller   Author's Homepage   Email Brad Miller       Edit/Delete Post 
It stays permanently at the theater. When needed, it simply is turned on. Sometimes 2 are needed to get full coverage, but no matter where you are in the building, you're on the network.

Why would you wait until the last minute to network? That's the first thing we do.

 |  IP: Logged

Steve Guttag
We forgot the crackers Gromit!!!

Posts: 12814
From: Annapolis, MD
Registered: Dec 1999


 - posted 07-31-2012 05:57 AM      Profile for Steve Guttag   Email Steve Guttag   Send New Private Message       Edit/Delete Post 
Simply because networking is the last thing we normally need. It also forces the theatre to have run the system "manually" so they know how to, at least, run the stuff.

Putting it on the network also takes relatively little time once all of the theatres are up.

I have noticed that for a DCS system...the network must come first.

I don't leave a wireless system on there and just bring my own if I'm going to be on-site...it takes how long to put it on the network? Seconds? Heck, every Barco projector has a switch built into it. The wireless I carry has a switch (as most routers do) built in so "splicing" it in is also a couple of seconds.

 |  IP: Logged



All times are Central (GMT -6:00)
This topic comprises 2 pages: 1  2 
 
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.