This is topic exciter lamp question in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000228
Posted by Scott Norwood (Member # 30) on 09-06-1999, 03:12 PM:
I'm looking for the ANSI code for the exciter lamp for an SH-1000 soundhead. This is the type with a base that looks somewhat like that of a flashlight bulb, not the later "self-aligning" base like you find on exciter lamps for newer soundheads (later RCA models, Century, most 16mm machines, etc.). Does this lamp even have an ANSI code? Thanks!
Posted by Ken Layton (Member # 133) on 09-06-1999, 04:12 PM:
You're looking for one of these depending on voltage/current rating with the standard single contact bayonet base:BXC 8.5 volt, 4 amp
BXG 10 volt, 7.5 amp
BXR 10 volt, 5 amp
BULB DIRECT 1-800-772-5267 can get them for you.