This is topic Help with part #s in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000542
Posted by Masao Garcia (Member # 184) on 01-09-2000, 08:26 PM:
I was wondering if anyone could tell me what the part # is for this fan that is installed in the projector head of a Christie P35C. I have a pic, that will hopefully load up and stuff.
And I also would like the part # for the flange on the left in this next pic. It's made by Neumade. The flange on the right is an 8" one, and I forget how big the other one is...maybe 14"? The flange on the left uses the smaller trailer cores, which I prefer over the larger ones. I should have gotten a pic of each core. Oh well.
Any help would be greatly appreciated.
Posted by Scott Ribbens (Member # 180) on 01-09-2000, 11:12 PM:
Don't take my word on this, but the only part # I have come up with for the cooling fan is 121330-001. This is the number for the one in a P35GPS, but I think that it is the same fan. I'm sure that you could call Christie in California @ (714) 236-8610 and they could tell you if it is the right part #. As to the flange, I haven't got a clue. I prefer the fiber reel flange with the two-way, spring loaded center. It handles those small cores that they use in most trailers these days, and the regular cores without having to unscrew that little pin that always seems to get lost.
------------------
"No matter where you go, there you are."
Scott
Posted by Greg Mueller (Member # 17) on 01-14-2000, 09:32 AM:
While everyone is looking for parts I need the following part for my NorelcoArc Lamp Bracket
Part number 3041-1
for a DP70 Norelco AA
Posted by Rick Long (Member # 213) on 01-15-2000, 02:03 PM:
The smaller flange is a Neumade SH-8. I would assume that the larger would be a SH-14.