This is topic Christie P35GPS Auto Turret Parts & Prices? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000567
Posted by HOPE WELLS (Member # 312) on 01-16-2000, 10:25 PM:
I am searching for diagrams, parts lists, and prices for the turret on my projector. My problem is that when I change the lens it doesn't rotate all the way. We actually have to physically move it to the desired position. This usually occurs going flat to scope. Is there rubber tires or an o-ring that the drive motor pushes up against? Or is it a geared tooth? Manual is extremely vague in description and need help!
Thanks!
Posted by Paul Konen (Member # 41) on 01-17-2000, 10:42 AM:
The turret motor has a rubber ring that turns the turret disk. I have a couple that do that also but just continue turning by hand until in the right position.
Posted by Jason Burroughs (Member # 68) on 01-17-2000, 11:22 AM:
There is an adjustment that can be made on the christie projector that determines how long the motor runs to change the lens. This process is explained pretty well in the manual. Annother possibility is that the relays that controll the changeover motor are shot, I've seen this happen quite a few times as well.
Posted by Richard Hamilton (Member # 321) on 01-19-2000, 12:28 AM:
this is a simple adjustment of your scope lens!!