This is topic Smart Mod V in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=001195
Posted by Jon Bartow (Member # 241) on 07-16-2000, 09:55 AM:
Anyone have a manual for the Smart MOD V? If not anyone know the recommended procedure for A and B-chain? i.e. where are the test points? How do you set Dolby level? etc.
Posted by Ken Layton (Member # 133) on 07-16-2000, 12:48 PM:
That manual is available to download on Smart's website (www.smartdev.com). Click on Menu of Places to Visit, then click on Product Manuals.
Posted by Gordon McLeod (Member # 33) on 07-16-2000, 02:42 PM:
The test points for the A chain are on the PCB on the door in the left corner near you when hinged down and level is shown on two led's one lit high both lit level other one light low
B chain plug the pinknoise card into the matrix slot and select stereo a set each channel for 79db with fader at cal and the front panel trimmer for a a cal mark
simple and straight forward
Posted by Oscar Neundorfer (Member # 458) on 07-16-2000, 02:51 PM:
Thanks, Ken and Gordon for answering this post so quickly. The direct web address is:
http://www.smartdev.com/library.htm
You will find the MOD V manual listed under PROCESSORS. The files are in pdf format so you will need Acrobat reader.
Let us know if you need any help. Call our service department at 1-800-457-6278.
Best regards,
------------------
Oscar Neundorfer
Chief Engineer
SMART Devices, Inc.
oscar@smartdev.com