Film-Tech Forum ARCHIVE: ?? about Kelmar rewind table

This is topic ?? about Kelmar rewind table in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=001285

Posted by Mike Beerbower (Member # 363) on 08-11-2000, 07:13 AM:

I need to order replacement reel support shafts for our Kelmar RTV-8900 rewind table, but I can't find the manual. Does anyone know if the part numbers listed in the RTV-8200 manual (acquired right here on Film-Tech :-) ) will correspond to the proper numbers for my 8900? I don't imagine they could be all that different, but I want to be sure.

Posted by Brad Miller (Member # 2) on 08-11-2000, 09:03 AM:

I am 99.99% sure they are all the same.

Posted by David Emery (Member # 382) on 08-11-2000, 01:34 PM:

Brad you do have the pages of that manual. If possible just post the picture of what he's asking for. I am about a week away from being able to make the true PDF file for that manual.

Posted by Mike Beerbower (Member # 363) on 08-11-2000, 05:26 PM:

Thanks for the info!

Posted by Brad Miller (Member # 2) on 08-11-2000, 11:05 PM:

I forgot about that. Here ya go.

Posted by Mike Beerbower (Member # 363) on 08-13-2000, 02:36 AM:

Thanks to David and Brad for the manual page. It's exactly what I needed!
David, when you get around to making that manual in a true PDF, would you mind emailing it to me? I still can't find a manual anywhere in our booth.

Posted by David Emery (Member # 382) on 08-13-2000, 02:40 AM:

Shure no problem. Isn't it kinda late there. Ops I guess it's pretty late here to G night.