This is topic Used a CINEMECANICA CNR 5 35 Platter/ in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002072

---

Posted by Kevin Baglow (Member # 721) on 03-23-2001, 06:37 AM:
 
It worked fine for years and in the last few weeks it continually goes eratic and the speed controal roller drops right down to the bottom and take up plate stops.
Its a five plate platter and boath of the speed controal roller systems do the same thing. We've worked on speed adjustments but no luck yet. Has any one had the problem & fixed it?
 

---

Powered by Infopop Corporation
UBB.classic^TM 6.3.1.2