This is topic CP 500 default volume adjustment in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002239
Posted by Jonathan Haglund (Member # 807) on 05-04-2001, 08:57 PM:
I've read the manuals fairly thouroughly and I can't find anything as simple as changing the default volume for each format. Our default for Dolby Digital was set several years ago and in my opinion is a little too quiet for some films. I would at least like to be able to change it, but I can't figure out how. Please help!------------------
Jonathan Haglund
Edwards Theatre Circuit, Inc
Park Place 10
Posted by Brad Miller (Member # 2) on 05-04-2001, 10:46 PM:
MENU
SK1/SYSTEM SETUP
SK3/FORMAT CONFIGURATION
SK3/BUILD FORMAT SELECTOR
SK2/ASSIGN FADER SETTINGSSelect the soft key that you wish to change
Dial up the desired fader setting
Press OK
Exit out of the menu
Posted by Tom Evans (Member # 857) on 05-05-2001, 06:39 PM:
Erm, don't access the CP-500 menu when the film is about to start and the processor mutes..it seems to stay in mute and you have to escape the menu by pressing FORMATS and then manually select a SK....weird.... 
------------------