This is topic Cinemeccanica turret problems in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002436
Posted by Paul Cunningham (Member # 501) on 07-01-2001, 09:48 AM:
We currently trying to troubleshoot our lens turrets but require some information. They are 2 lens turrets and have 4 microswitches mounted on a small circuit board. These microswitches are activated by a combination of rivets and 'rails' around the turret.What does each microswitch do/control ?
The intermittent problems we are having are,
1) The turret continues to spin around without stopping
2) The aperture plate (motor driven not solenoid) does not go to C/S when the lens does, it seems to want to go the other way.
Thank you in advance
Paul
Posted by Stan Gunn (Member # 554) on 07-01-2001, 10:19 AM:
Hi paul
the micro switchs stop the lens at the correct position,
and operate the aperture plate I think I have details on those turrets, give me a call.Regards Stan.
------------------
ALL PARTS FOR VICTOR AND KALART VICTOR 16MM PROJECTORS.
SERVICE TO 35 AND 16MM
PROJECTION EQUIPMENT.