This is topic Looking for manuals in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002532
Posted by John Walsh (Member # 168) on 08-03-2001, 10:24 AM:
Anyone have a manual for a Christie Series IV automation? They are cam-timer relay type, mounted in a Christie SLC console.A Kelmar cue detector/ failsafe. I'm actually not sure exactly which model, but it's not the old foil-reading type.
And a EIKA EX9100 (16mm) projector.
As you might have guessed, I'm been cornered into helping the local non-profit "arts center" get their booth going.....
Thanks!
Posted by Ken Layton (Member # 133) on 08-03-2001, 11:45 AM:
For the Ekik manual, contact Tim Plew at Eiki, 1-800-242-3454 ext 107 or Paul Cuculic in tech service there also. Other phone number for Eiki is (714) 457-0200. Eiki only sells thru authorized dealers. Ask them who your local dealer would be. Expect to pay around $50 for the EX-9100 service or owner's manual.
Posted by John Walsh (Member # 168) on 08-03-2001, 11:51 PM:
Thanks, Ken. I'm so spoiled from getting free manuals here.. having to pay for them makes me wigg out a little!Since this a low buget job , I'll see first if they want pay for the EIKA manual..
Thanks!
Posted by Stan Gunn (Member # 554) on 08-05-2001, 10:46 AM:
Hi John
I have a manual for a christie am 5, I think they are very simular,
let me know and I will copy it for you.
Regards
Stan Gunn 
------------------
ALL PARTS FOR VICTOR AND KALART VICTOR 16MM PROJECTORS.
SERVICE TO 35 AND 16MM
PROJECTION EQUIPMENT.