Film-Tech Forum ARCHIVE: Long Term Equipment Storage

This is topic Long Term Equipment Storage in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002535

Posted by Barry Floyd (Member # 385) on 08-04-2001, 01:10 PM:

I am getting ready to move all of my projection & concessions equipment into "long term storage" (maybe 6 months to a year) as construction begins on our theatre , and wanted to know if there are any precautions I should take when I put this stuff away.

Projection Equipment:
4 - Brenkert BX-60's w/ RCA 9030 SH
1 - Simplex XL w/ SH-1012

Should I drain all of the oil out of the projectors, coat anything with oil... I'm not sure what to do?

------------------
Barry Floyd
Floyd Entertainment Group
Nashville, Tennessee
(Drive-In Theatre - Start-Up)

Posted by Ken Layton (Member # 133) on 08-04-2001, 01:13 PM:

Make sure it's HEATED storage and that the area is dry. Projection equipment rusts very easily.

Posted by Barry Floyd (Member # 385) on 08-06-2001, 03:59 PM:

The storage area I have available is not heated, but it does have electricity.

Should I coat any "rust-prone" surfaces (i.e. sound head drum, etc.) with any type of oil or something. I was considering crating up the projectors and soundheads in wooden crates, but I don't know if that would be necessary.

------------------
Barry Floyd
Floyd Entertainment Group
Nashville, Tennessee
(Drive-In Theatre - Start-Up)

Posted by Will Kutler (Member # 770) on 08-06-2001, 06:09 PM:

Hi Barry!

Go to a performance automotive or hot rod engine shop. There are special greases and lubricants used to store engines and machinery for long term storage. But, generally speaking, these lubricants must be thourghouly flushed when the equipment goes back into service, and proper operating lubricants reaplied. Yes, humidity and temperature control is very important. Professional vacume sealing for machinery might be a good idea. But remember that if not done properly, plastic bags can retain moisture. Also see about the large anti moisture containers--these are large versions of those little packs that come in suitcases, camera equipment, etc. These containers to need to be inspected and drained of moisture on a regular basis. Regular oils may gum up if static for a long time. In any case, when you bring the equipment back into service, thourghly clean it and test/clean all oil passages/galleries/groves to make sure they are clear. Also, keep fingerprints off of equipment--fingerprints and oils from your skin can enhance corrosion. Make sure equipment is properly cleaned and prepped prior to applying storage lubricants.

Posted by Dave Macaulay (Member # 813) on 08-06-2001, 10:29 PM:

If the environment is fairly stable you shouldn't have huge rust problems. I don't know about Nashville, but unheated storage in Toronto is bad in summer as the metal cools off at night and then condenses water during the day if hot humid air can get in at it.
A coating of light spray oil should suffice for a few months. Really long-term storage in humid locations means a grease coating and wrapping - and a nasty cleanup when you want to use the stuff.
I've used sprayed-on WD40 and wiped-on 2-stroke oil to protect motorcycles stored in unheated sheds, and both work pretty well but the oil doesn't disappear like WD40 so I think it's better.

Posted by Will Kutler (Member # 770) on 08-07-2001, 06:27 PM:

No to W.D.-40. !!!!!!!!!!!!!!!!!!!