This is topic Xetron Maxi 10 C in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002709
Posted by Chris Erwin (Member # 176) on 10-09-2001, 03:25 PM:
Would anyone happen to have a manual for this unit? The manual section has the 10X but not the C-different animal.Any leads or info on this appreciated.
Thanks,
Chris
BTW, where do you guys normally buy your relays from?
Posted by Ken Layton (Member # 133) on 10-10-2001, 12:10 AM:
Isn't that the unit made by Kelmar?You could call Xetron/Neumade also.
I just bought a bunch of relays for a Maxi 7 from Scott Hicks' AMERICAN CINEMA EQUIPMENT (www.cinequip.com) in Portland, Oregon and they were genuine Potter & Brumfield relays.
Posted by Jon Bartow (Member # 241) on 10-10-2001, 06:51 AM:
You can get the relays from just about any major electronics supply company. (i.e. Newark Electronics or somewhere else ) They are very common pieces of electronic components.
Posted by Bob Maar (Member # 763) on 10-10-2001, 11:49 AM:
Chris,I have asked our engineering department to check the archives and see if we have any of the original information on the Maxi 10C. Iwill post an answer as soon as they get back to me.
Bob
Posted by Bob Maar (Member # 763) on 10-10-2001, 01:21 PM:
Chris,Call Gregg Jones at Xetron 1 800 526-0722. He has a copy of the Maxi 10C and can go over it with you.
Regards,
Bob
Posted by Chris Erwin (Member # 176) on 10-10-2001, 04:56 PM:
Ken,
Yep. It's a Kelmar. Built like a tank. Thanks for the lead on the relays. Thanks too you to Jon. I figured they were commonly available.
Bob,
Thank you very much. I will call him tomorrow. Hopefully this 10C will see service in my cinema.
--Chris