This is topic Ektapro 5000 info required in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002926
Posted by Dick Vaughan (Member # 540) on 01-02-2002, 08:02 AM:
Does anyone out there have a manual for the Ektapro 5000 slide projector?we specifically require information on the wiring of the remote connector.
TIA
Posted by Barry Hans (Member # 477) on 01-02-2002, 11:49 AM:
pin 1- 12 vdc
pin 2- gnd
pin 3- signal 1 (lsb)
pin 4- signal 2
pin 5- signal 3
pin 6- signal 4
pin 7- signal 5 (msb)
pin 8- interrupt
This is the 8- pin standard projector socket ( round socket )
Posted by John Pytlak (Member # 331) on 01-02-2002, 12:27 PM:
Here's a link:
http://www.kodak.com/global/en/service/library/projectors/slideProj.shtml ------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Research Labs, Building 69, Room 7525A
Rochester, New York, 14650-1922 USA
Tel: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion