This is topic Optical slit lens roll-off in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002961
Posted by Paul G. Thompson (Member # 655) on 01-14-2002, 02:22 AM:
I can't remember....Pardon my feeble mind.What are the optical slit sizes that were used, and what was the roll-off characteristics of each?
I thought a 9 khz roll-off was with the 1 mil slit. Am I right or wrong?
Paul
Posted by Ray Derrick (Member # 1001) on 01-14-2002, 09:42 PM:
Paul, you'll find a diagram at the very back of any CP45, 55 or 65 installation manual.------------------
Ray Derrick
President/Chief Engineer
Panalogic Corporation Sydney, Australia
Phone: 61 (0)2 9894 6655 Fax: 61 (0)2 9894 6935
Posted by Paul G. Thompson (Member # 655) on 01-14-2002, 10:38 PM:
Thanks, Ray. I'll check it out. Paul