This is topic Film inspection reports in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003106
Posted by Barry Hans (Member # 477) on 02-18-2002, 11:48 AM:
I would like to know if there is any standard grading of film for film inspection reports?. I have seen the TAP grading but it seems only to involve scratches and nothing to do with the problems operators find during inspection, ie- oily prints, edge damage, excessive/ poor splices ect? Does anyone have a template of a report that I could use?
Posted by John Pytlak (Member # 331) on 02-18-2002, 12:57 PM:
Here's a form used by Cowboy Pictures: 
http://www.cowboypictures.com/printform.pdf ------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Research Labs, Building 69, Room 7525A
Rochester, New York, 14650-1922 USA
Tel: 585-477-5325 Cell: 716-781-4036 Fax: 585-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion