This is topic Laptops for technicians? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003116
Posted by John Gordon (Member # 523) on 02-20-2002, 03:22 PM:
A few questions regarding tools used in the field.
1) What operating system (95, 98, 2000, etc.) do you have on your laptop computer(s)?
2) What screen resolution do you use (640 X 480, 800 X 600, etc.)?
3) If you were going to upgrade your laptop, what would your operating system preference be?
Posted by Paul G. Thompson (Member # 655) on 02-20-2002, 04:41 PM:
Check and see if the software you use for the SDDS, Dolby Digital, Etc. to determine what it will be happy with. The techs I know use Windows 98. Whether Windows ME or XP will run your software, I don't know.
Posted by Jon Bartow (Member # 241) on 02-20-2002, 05:57 PM:
1. I use a laptop with Win98SE.
2. it has a resolution of 800x600 active matix (which is very nice if you want to look at the screen from across the room at an angle. heck of a lot better than a dual scan)
3. If I were going to buy another laptop it would either be similar or "weaker" (The one I have is an AMDK6-2 380Mhz "multimedia" i.e. DVD-rom and a decent video card)
Most of the software (Dolby, SDDS, THX etc uses DOS so you really don't need much. I think the R2 software only requires a 386 with a CGA monitor. The Dolby CP650 software does require Windows.
Windows ME and XP have a lot of problems with their simulated DOS modes, so I would shy away from those (besides the licensing with XP is a pain)
I am about to upgrade my laptop to Win2000 Pro with a dual boot for Dos 6.22 however (I use my laptop for non-theater work where the NT architechture is going to be needed)
Randy has had some luck with running the theater programs on an i-Mac I believe
Posted by Kris Brunton (Member # 432) on 02-20-2002, 07:22 PM:
I have a PII 333Mhz Sony laptop currently running Win 98. As most theater programs (Dras10, R2, Load500, etc.) are still running DOS I find this the best for me. I was running Win2000 with a dual boot as described by Jon but had to switch back. I found the it was always causing screen freezes and various other windows headaches. I found the dual boot portion worked great though.My screen resolution is running at 1024x768.
I have had this laptop for about 3 years now, halfway around the world and it is still ticking.
Posted by Mark Gulbrandsen (Member # 72) on 02-20-2002, 08:51 PM:
Old Toshiba 120 mhd dual scan color. Running Win 98SE. Have lept it all these years to run my R-2 as its very stable with it. This laptop was actully reccommended by Lucaspixel and that has paid off for me. I recently installed a 20gig HD in in place of the 1.3gb drive it came with. I ahve no intention of buying a new one till this one craps out. I spend enough time on the computer already! I also run a number of lighting system programming type programs on it that are DOS and have had no problems with them either. for those that have heard of them Strand Premiere, Premiere networking, CD80SV O.S., and Colortran Viewpoint are several that get used the most.
Mark @ Home
Posted by Trevor Bailey (Member # 75) on 02-20-2002, 10:33 PM:
I would definately stay away from XP (and most likely any other NT based Windows). It does not work with any Sony software...DCP-1000, DFP-2000, DFP-3000. I am also told it does not work with Dolby's CP-650 but they are working on it. Some people have been able to get processor setup software running on ME but others have not. I have been able to run all of the Sony software under ME.
I am not very picky about screen resolution as long as it is at least 800x600. But, active matrix (TFT) is much better...passive (PSTN) is harder to see.
Most important...in my opinion...is a SERIAL PORT. USB to serial converters do not seem to be reliable, so make sure the laptop has the legacy serial port...and save yourself some headaches!
Posted by Gordon McLeod (Member # 33) on 02-21-2002, 08:59 AM:
I still use a trusty (and a bit crusty) IBM thinkpad P133
It has 2 partitions on the HD with Bootmagic
DOS
Win98
OS2
Posted by Scott Christopher (Member # 834) on 02-27-2002, 08:43 PM:
Get ready for this......the laptop i'm using is:
486 (???MHz) no faster than 75
Win95b
8Mb Ram
Yes it's slow, but it's running 'DRAS' beautifully.
Posted by Glenn Conatser (Member # 970) on 02-28-2002, 12:13 AM:
Im a little curious to know if there is any software for Mac's available ? Thanks
Posted by Randy Stankey (Member # 64) on 02-28-2002, 10:36 AM:
You can run DRAS and LOAD500 on a Mac with little or no trouble once you have Virtual PC installed correctly. You can also run the Sony program and USL's DSP-60 as well.WinScope and SmartPro are supposed to work OK but the problem is getting proper interface inputs. When you use a piece of equipment that works on a serial RS-232 interface you can buy an adaptor. When you are using audio inputs you may have trouble. The new iBooks don't have direct audio input. You have to go through the USB port. I haven't even attempted to make that work yet.
I have had very few problems getting my Macs to work in environments where all the people using computers are on Windoze systems and behave closed-mindedly towards Apple.
I can network Macs to PCs. I can share files. I can even run most of their programs. People tend to have this mythical belief that the two systems can NOT work together when it is clearly not the case. On a couple of occasions I had to show a guy, in person, that sending me a file by e-mail from his PC to my Mac could be done.
Incompatibility is just a myth propogated by closed-minded people. (On BOTH sides of the fence.)