This is topic EPRAD SA-150 (Manual Request) in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003154
Posted by Manny Knowles (Member # 1171) on 02-27-2002, 11:04 AM:
I recently inherited an EPRAD SA-150 Solar Cell Alignment Indicator. I'm not a huge fan of this but, since it was a gift and it's also a whole lot more portable than an oscilloscope, I'm going to use it to *verify* A-Chain alignments when I do monthly work on my machines.
It seems pretty straightforward, but I'd still like to have a manual for it. Any help would be appreciated.
Also...even if you don't have a manual...if you know this device, I'd like to hear your thoughts on it.
------------------
And, hey! Let's be careful out there.
~Manny.
Posted by Ken Layton (Member # 133) on 02-27-2002, 06:12 PM:
Why not contact Eprad? www.eprad.com
Posted by Manny Knowles (Member # 1171) on 02-27-2002, 07:19 PM:
Yes, I contacted them. I had to fill out a form and it's taking a while to activate my account. They said to allow about two days for activation.I guess I'm just spoiled rotten by the Manuals section here!
------------------
And, hey! Let's be careful out there.
~Manny.