This is topic Need to go to film spicer school! in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003281
Posted by Don E. Nelson (Member # 1049) on 04-09-2002, 02:14 PM:
Help?I have a wonderful Italian made guiotine splicer for my 16mm films but I was recently given a 35mm splicer and I am not sure how it works. I know how to align the film properly and cut it but what is that extra arm for that sticks out to the right? It has a rubber pad on it, does the splicing tape go on that arm or is that just to flatten out the splice. Help me obi-wan-filmtechs, you are my only hope.
Thanks.------------------
...more signal, less noise!
Posted by John Pytlak (Member # 331) on 04-09-2002, 02:55 PM:
A good place to start would be the "Splicing Tips" in the "Tips" section of Film-Tech.Do you have the instruction manual for your splicer? What model is it?
------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Research Labs, Building 69, Room 7525A
Rochester, New York, 14650-1922 USA
Tel: +1 585 477 5325 Cell: +1 585 781 4036 Fax: +1 585 722 7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion
Posted by Darryl Spicer (Member # 711) on 04-09-2002, 06:20 PM:
lmao I didn't know I had a film spicer school. Come join and learn how to do film done right. 