Film-Tech Forum ARCHIVE: Triumph over AW3 MUTS

This is topic Triumph over AW3 MUTS in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003284

Posted by Michael Rourke (Member # 1142) on 04-09-2002, 07:30 PM:

Thanks to everyone for your help, the MUT that wouldn't break down needed new brushes, and now it works fine.

The makeup selector switch was the culprit for the MUT that would only build on the bottom deck, and it was a coincidence that the one I swapped from another tower also only allowed building on the bottom deck. I got a replacement and now it works great.

One more question, I found a piece of tape under the MUT that said "greased 2/93" what exactly do you think was greased the shaft bearing? Is that something that should be done more that once a decade? What kind of maintennance do you guys give your MUTS?

Thanks, Mike

Posted by Brad Miller (Member # 2) on 04-09-2002, 10:23 PM:

This needs to be posted in the original thread and not in a new one.

Thread closed.