This is topic Installing a cat.441 in a CP-55 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003470
Posted by Josh Jones (Member # 447) on 05-20-2002, 10:41 PM:
I need instructions on how to install this card in my CP55. Had no problem finding one for the cat 222SRA, but I cant find one for the cat 441. help guys.JJ
------------------
"Film is made of silver, video is made of rust"
'nuf said
Posted by Mark Gulbrandsen (Member # 72) on 05-20-2002, 11:46 PM:
Josh, Its in the DA-20 manual! The thing is that the fold out drawings are not on the one in the Film-Tech manuals section.
MArk @ GTS
Posted by Ken Jacquart (Member # 369) on 05-20-2002, 11:46 PM:
Josh,Look in the DA20 Installation Manual... it's in there. (Too many backplane jumpers to list in this reply 
)
ken
Posted by Josh Jones (Member # 447) on 05-21-2002, 01:04 AM:
Thanks guys Josh
------------------
"Film is made of silver, video is made of rust"
'nuf said
Posted by Pete Naples (Member # 761) on 05-21-2002, 01:10 AM:
Josh, if you're not using to get split surrounds for SR.D / DTS, then just wack it in the Cat 241 slot. If you want the full monty from it, then as said above, get your nose into the DA20 book. It's not difficult to do the mods, as long as your eyesight and soldering are good!
Posted by Josh Jones (Member # 447) on 05-22-2002, 09:16 PM:
well, my soldering might not be as good as a wave tank, but it is decent. The processor is now running happily Thanks again guys
Josh
Posted by Paul G. Thompson (Member # 655) on 05-22-2002, 10:26 PM:
Cool.
Posted by Pete Naples (Member # 761) on 05-23-2002, 02:54 AM:
I did exactly that job a couple of weeks back, Cat 222SR/A and Cat441 into a CP55. I didn't do all the mods on the backplane as the theatre only wanted the OBE facility, they're not interested in digital at this time. The Cat441 in tha tset up was easier than the Cat222SR/A, just plug and play!