This is topic Christie P35 Frame Drift in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003583
Posted by Paul G. Thompson (Member # 655) on 06-14-2002, 07:09 PM:
I have one that does it. The manual documentation is so poor it does not address that adjustment. I don't want to tear into that thing and make adjustments unless I have some idea about what I am doing.I might add the frame nkob does turn very easyly, too easy in fact.
Any suggestions?
Thank you.
Posted by Brad Miller (Member # 2) on 06-14-2002, 07:22 PM:
While looking in on the backside of the unit, have someone turn the framing control up and down. You will see where the framing shaft is geared and there are 2 allen head bolts you can tighten to prevent this, or lock the framers down completely.
Posted by Paul G. Thompson (Member # 655) on 06-14-2002, 07:48 PM:
Thanks, Brad. I'll tend to that adjustment when the movie is out.<edit> Adjustment made, conditions are once again normal. 