This is topic Ch-10 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003913
Posted by Mike Fitzgerald (Member # 1304) on 08-25-2002, 11:02 AM:
I am looking for the electric diagram for the wiring hookup on the Christie CH-10 console. I looked in the manual section and found the whole manual but nothing really there on the automation or the suggested hookup for the connector strip that is mounted in the base. Thanks ------------------
Fitz
Posted by Steve Guttag (Member # 268) on 08-25-2002, 09:21 PM:
Whilst the automation may be mounted in your CH-10 console, it isn't part of the console's wiring. Unscrew the automation and the screws holding the barrier strip and out it comes (after removing some of the factory prewires for the xenon)You need to find the model of the automation you have before we can help you there....like AM-3 or something.
Steve
------------------
"Old projectionists never die, they just changeover!"