This is topic Teco manufacture in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004004
Posted by Don Sneed (Member # 955) on 09-17-2002, 08:13 PM:
I hope I didn't post this in the wrong place, if so then I need to be slap !! Do anyone know where or how I can get Teco parts for a rewind table, My company cannot find any listing for them, any help is much needed, Thanks guys....
Posted by Richard Fowler (Member # 893) on 09-17-2002, 08:30 PM:
TECO - 2938 Gladys Fork Road - Ferguson, N.C. 28624 -- 800-863-8326 /
e-mail rsaund1915@aol.com
Richard Fowler
TVP-theatre & Video Products Inc. www.tvpmiami.com
Posted by Don Sneed (Member # 955) on 09-17-2002, 09:15 PM:
Thanks Richard, you are a life saver...
Posted by Wes Hughes (Member # 981) on 09-18-2002, 12:22 AM:
does TECO still manufacture new stuff or just supply parts? I thought they had closed down????
Posted by Ken Layton (Member # 133) on 09-18-2002, 08:58 AM:
Teco is still in business, but they moved to a new location 2 years ago at the address that was mentioned in the above post.
Posted by John Pytlak (Member # 331) on 09-18-2002, 09:20 AM:
Members of the International Theatre Equipment Association can be found in the ITEA on-line directory:
http://www.itea.com/mem_directory.html Boxoffice Magazine has an on-line "Buyers Directory":
http://www.boxoffice.com/buyers.html
As does the Film Journal:
http://www.filmjournal.com
------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Research Labs, Building 69, Room 7525A
Rochester, New York, 14650-1922 USA
Tel: +1 585 477 5325 Cell: +1 585 781 4036 Fax: +1 585 722 7243
e-mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion