This is topic Strong MUT Spindle in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004057
Posted by Joe Redifer (Member # 3) on 10-02-2002, 05:17 PM:
Does Strong offer a keyed spindle for their MUT like every other manufacturer on the planet does and is standard across all projection booths and reels? Who am I kidding? Of course they do! To not do so would be ignorant of modern projection booths and intelligent design in general.So does anyone know the part number and cost?
Posted by Ken Layton (Member # 133) on 10-02-2002, 06:40 PM:
Part number 3930 and Scott Hicks' American Cinema Equipment has them for $175.
Posted by Joe Redifer (Member # 3) on 10-02-2002, 07:44 PM:
Thank you.
Posted by Bob Maar (Member # 763) on 10-02-2002, 08:08 PM:
Hey Joe! I will sell you two for $ 500.00 
Posted by Joe Redifer (Member # 3) on 10-02-2002, 08:19 PM:
What a deal! Does that come with a new splicer?
Posted by Bob Maar (Member # 763) on 10-02-2002, 08:48 PM:
Yes it does, but you have to be a graduate of the "School Of Hard Knocks". Please file the proper forms with the proper department heads.
Posted by Joe Redifer (Member # 3) on 10-02-2002, 11:31 PM:
OK I submitted the forms and your associates said everything looked good. They also took my $500. However I am looking around the room right now and I don't see the new splicer. Where is it???