This is topic Strong xenon power supply question in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004388
Posted by Dan Lyons (Member # 1454) on 01-04-2003, 01:10 PM:
In my hunt for a lapmhouse setup, I've come across a Strong Xenon Power supply model # 6280106.
Are there any known issues or reliability problems with this model?
Here are the details from the faceplate : LINE: A.C.AMPS 20.2;A.C.VOLTS 200-240; HERTZ 50-60;PHASE 1-3; K.V.A. 3.5; LAMP: D.C.AMPS 50-100;D.C.VOLTS 20-30;TYPE 6280106;SERIAL # 1125;
Thanks
Danny
Posted by Jean-Michel Grin (Member # 1360) on 01-05-2003, 10:06 AM:
Hello Dan,
For me these power supply work great when they are used in single phase and neutral configuration. From more than 7 years I use 10 of them in two multiplexes without troubles. But the xenon lamp we use with theses power supply is in a range from 1 kw up 2.5 kw. no more.
By the past in the biggest auditorium we had a 7 kW xenon with a another Strong power supply running three phase circuit. Wat's happend ? At the moment the projectionist switched off the light of the auditorium, the power supply blowed up !
From this time we used a classical Irem rectifier an recently we replace them by a brand new electronical rectifier, in a single phase configuration.
Conclusion: these power supply from Srong working fine but only in a single phase configuration an a output power up to 2,5 kW.
On advice I believe that Strong made a new rectifier more compact and less expensive, but in don't remember the model number. Ask your local dealer.
Good luck, and sorry for my really bad English
Posted by Gordon McLeod (Member # 33) on 01-05-2003, 11:47 AM:
Had little grief in both 3 phase and single phase if they are kept cool,well grounded , and stable power supplied to them.
And when they die they are light enough to pickup and ship back to strong cheaply and litterly plug in another
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2