Film-Tech Forum ARCHIVE: Aopha Platter Variac

This is topic Aopha Platter Variac in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004503

Posted by Dustin Mitchell (Member # 372) on 01-31-2003, 06:08 PM:

Can anyone tell me what the size of the set screw is that holds the end cap on the variac in the Alpha platter?

Thanks in advance.

Posted by Daryl C. W. O'Shea (Member # 1303) on 01-31-2003, 06:38 PM:

If you're talking about the screw that goes in the end of the variac shaft it is 10-32 x 3/8" screw (which also goes through a #10 washer).