Film-Tech Forum ARCHIVE: Eprad Monitor Switcher

This is topic Eprad Monitor Switcher in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004546

Posted by Joe Beres (Member # 678) on 02-13-2003, 04:02 PM:

I have an older Eprad Monitor switcher in the booth. It isn't the SLM-150 as seen in the "Manuals" section, and it doesn't seem to have a model number, unless the "25746" printed by the serial number is an indication. It has a 10 position rotating switch. Does anyone have a manual for it? Can it be used with a CP-55? How should it be wired? Is it worth the trouble? The volume pot definitely needs some cleaning, but beyond that, I am not sure if it works. It must have been taken out of service at some point, perhaps when the new amps were installed backstage.

Posted by Gordon McLeod (Member # 33) on 02-13-2003, 04:40 PM:

It is probably a 4 watt IC amplifier and works on monitoring the speaker lines check out the eprad starscope or starlet manuals on line they might have it at the end