Film-Tech Forum ARCHIVE: Getting to the film-tech forums

This is topic Getting to the film-tech forums - Firewall Issue in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004604

Posted by Ray Bernardi (Member # 1615) on 02-27-2003, 04:29 PM:

In order to get the film-tech forums to display, I have to disable my firewall. I'm confused.

I'm using zone alarm as my firewall. Has anybody else had this problem? If so, is there a fix other than bringing down my firewall?

I've been looking for a solution but I haven't found one yet.

Posted by Daryl C. W. O'Shea (Member # 1303) on 02-27-2003, 04:32 PM:

My first guess is that you have cookie control set way too high. Try setting 'cookie control' to off under the privacy tab.

Posted by Mike Olpin (Member # 1115) on 02-27-2003, 05:11 PM:

I'm using the new Apple browser "Safari" and so far I really like it - except when I browse the forums here. The "No Bookmarking" page shows up whenever I use my browsers "back" button. I have contacted Apple about this.

Posted by Kenneth Wuepper (Member # 1174) on 02-27-2003, 05:32 PM:

I also use Zonw Alarm with no problems. It works with both the Netscape 7.0 and Internet explorer. Netscape is my choice as it get me lots less "junk".

KEN

Posted by Brad Miller (Member # 2) on 02-27-2003, 06:44 PM:

This does not belong in this forum. Moving to Yak.