Film-Tech Forum ARCHIVE: P/N's needed for Misc. items

This is topic P/N's needed for Misc. items in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004744

Posted by Michael Rourke (Member # 1142) on 04-02-2003, 02:55 AM:

I have read a bit about "cookie sheets" on the forum but no one mentions the manufacturer. If someone could please list the p/n for those that would be great, Thanks. (Office Space) Can you tilt the cookie sheet diagonally with the print on board to get through door ways? Without it falling off, of course.

Also, I can't find the Kelmar rewind table film cleaner bracket on their website, I saw a homemade bracket posted by Steve Guttag I believe, but if anyone knows a maunfactu1er p/n for a Kelmar 8900 series rewind bench bracket to accept a Kelmar film cleaner please let me know.

And lastly, does anyone know the p/n for motor brushes for the newer AW3R drive motors. They should have a lead and a spade terminal and NO SPRING CHRISTIE! My Christie tower book is about 10 years old and I have been encountering problems with ordering.

Thanks in advance.

Posted by Kris Brunton (Member # 432) on 04-02-2003, 07:46 AM:

I think the part number for the motor brush is 599000-089. I think if you check out page 14-15 in the manuals section here you will find it.

You can send me a note off line in regards to the film movers.

Posted by Ian Price (Member # 14) on 04-02-2003, 02:01 PM:

"Cookie Sheets" you make yourself. I wouldn't tilt one to get it through the door, that's why I use clamps.