This is topic Dolby and other courses in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004856
Posted by Erik Stevens (Member # 1497) on 05-05-2003, 09:52 PM:
G'day to all,
I would like to find out about the courses that Dolby and other companies ie: Kinoton, Cinemecanicca etc. hold. If anyone has attended any of the courses, could you let me know what you thought, and how you came about 'enrolling'/finding our information to these courses.
I have looked over their websites, but have not found any details what so ever.
Ciao,
Erik
Posted by Mark Gulbrandsen (Member # 72) on 05-05-2003, 10:08 PM:
The Dolby course only gets into the very basics of cinema sound. If thats what you are after then its a good idea....there is always good food too. They used to conduct an advanced course but it has not been given in years
.
Mark @ CLACO
Posted by John Pytlak (Member # 331) on 05-05-2003, 10:18 PM:
Check Kodak's website regularly for the latest training programs being offered by Kodak:
http://www.kodak.com/US/en/motion/train/
http://www.kodak.com/US/en/motion/screencheck/projTraining.shtml
Posted by Paul Mayer (Member # 355) on 05-05-2003, 10:27 PM:
A friend of mine here just went through both the Dolby and Kinoton courses (lucky bastard). I'll see if I can get him to post his impressions.
Posted by Ken Lackner (Member # 1002) on 05-06-2003, 07:10 AM:
Kinoton has a course? Details, please!
Posted by Richard Fowler (Member # 893) on 05-06-2003, 09:42 AM:
Kinoton recently gave successful three day training sessions in Boston and Los Angeles for about 60 people. Two lead technicians from Germany did the training in addition to Kinoton America staff. Larry Shaw was on hand for both sessions. Sessions covered the cinema and studio line of hardware and included actual strip down and assembly of equipment, technical software and other matters. Future sessions are a possibility..........
Richard Fowler
Kinoton America Inc.
Posted by John Pytlak (Member # 331) on 05-06-2003, 09:44 AM:
I recall that Kinoton America had a short course at their headquarters in Brighton MA about a month ago. Darryl Jones from Kodak attended and found it very worthwhile. Larry Shaw or Richard Fowler may be able to provide details and if any more are scheduled again soon.
http://www.kinotonamerica.com/index.htm
http://www.kinotonamerica.com/direct.htm
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2