Film-Tech Forum ARCHIVE: Messurement on Kinoton FP30

This is topic Messurement on Kinoton FP30 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004996

Posted by Per Hauberg (Member # 529) on 06-14-2003, 03:31 AM:

Would anybodý please help me:

I am going to build (mould) a base for my upcoming projector, and due to the usual lack of space, this base may not be wider than absolutely necessary. Trouble is, that in none of the drawings, i can find on the FP30, there is a drawing of the projector, seen from the top, and therefore, i lack the exact
placement sideways of the optic axis. Even if films are pretty bad nowadays, i would prefer them to hit the porthole.

Of course, i can have this from Kinoton, when they are back at the office on monday - but the bricklayer is coming in on sunday...!

Thanks for any help on this.

Per

Posted by Michael Schaffer (Member # 1204) on 06-14-2003, 08:34 AM:

Do you have a fast internet connection? Then I can send you the manual (10MB).

Posted by Dave Macaulay (Member # 813) on 06-14-2003, 10:16 AM:

The optical axis is 482.7mm from the back surface of the closed non-operating side door.
I can fax you the dimensions page if you'll email me a number.

Posted by Per Hauberg (Member # 529) on 06-14-2003, 11:54 AM:

Thanks Both.

Dimension page already arrived per mail, but manual should be most welcome.

"Before pictures" are in the "Malling Bio Pictures" on F-T.

Per