Film-Tech Forum ARCHIVE: Weaver changeover coil question

This is topic Weaver changeover coil question in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005046

Posted by Josh Jones (Member # 447) on 07-01-2003, 10:19 PM:

A friend of mine needs a replacement coil for a Weaver model C changeover. Wolk has a number 6 and a number nine coil available. Is anyone here sure of which coil will fit and/or what the differences are between the two.

Josh

Posted by Ken Layton (Member # 133) on 07-01-2003, 11:51 PM:

For Century C, you should have part number C-9 coil. Weaver's part numbering system goes like this: Century C parts are all prefixed with "C-" followed by a number. The coil is number 9. If you needed a coil for a Simplex E7 the number would be E7-9.