Film-Tech Forum ARCHIVE: CAT 113-1 help

This is topic CAT 113-1 help in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005266

Posted by Marc Jones (Member # 29) on 08-29-2003, 11:18 PM:

I thought I found someone with a CAT 113C for sale, but what I got was a Cat 113-1, any one have any clue on how it is connected/operates, and may be could possiby fax or email me a schematic or manual pages.
Thanks

Posted by Peter Hall (Member # 695) on 08-30-2003, 12:04 AM:

Is a 113c1 the automation only card, with green and red leds but no switches ??

Posted by Marc Jones (Member # 29) on 08-30-2003, 07:48 AM:

Yes it has Green and red LEDs , but no switches except for power supply bypass and optical fault.
thanks

Posted by Rick Long Jr (Member # 541) on 08-30-2003, 01:03 PM:

Check out section 7.5 in the CP-50 installation manual. (in the Manuals section here) The main difference between this card and later Dolby automation interface is that this one uses maintained contacts rather than pulsed contacts.

Posted by Marc Jones (Member # 29) on 08-30-2003, 03:07 PM:

Thanks for the help
Going to the manual answered my question imagine that.
Thanks again for the help