Film-Tech Forum ARCHIVE: Requested Manuals: RGM, TECO, Kinoton

This is topic Requested Manuals: RGM, TECO, Kinoton in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005414

Posted by Ken Lackner (Member # 1002) on 10-03-2003, 11:12 PM:

Does anyone have manuals they'd be willing to share, either electronic or hard copy, for that following equipment?

Kinoton FP-23C projector head

TECO platter and MUT (don't know if TECO had different models, but these are the old manual platters with non-removeable brains)

RGM SPATS (not SPATS II) automation

Thanks.

Posted by Adam Fraser (Member # 1074) on 10-04-2003, 01:37 AM:

I have the teco manual for our platter, no real info except a few diagrams and how to unpack it from the crate. But if you need something specific from it maybe I could copy a page or two. email me if you do.

Posted by Aaron Sisemore (Member # 145) on 10-05-2003, 02:04 AM:

While on the subject of manuals needed:

I sure could use a manual for a Neumade/Xetron Maxi-9/PC automation (The Maxi-9 manual in the F-T manuals section is NOT for the same device that I have).

-Aaron