Film-Tech Forum ARCHIVE: SRA5 with CP55. Prologic on non sync.

This is topic SRA5 with CP55. Prologic on non sync. in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005463

Posted by Duncan Smith (Member # 1556) on 10-16-2003, 03:22 PM:

Just a quick question, I will be getting my SRA5 and 55 hooked up this week to provide me with a prologic (LCRS) signal on my non-sync. My question is this: Will I get an OBE signal from this too? I have a cat 441 OBE card in the 55 and obviously enjoy OBE from my SR tracks already.

Cheers. [thumbsup]

Posted by Aaron Sisemore (Member # 145) on 10-17-2003, 12:28 AM:

With a CP55 you should get only L/R/S in non-sync with matrixing enabled. No C or OBE/SW.

-Aaron

Posted by Darren Briggs (Member # 1071) on 10-17-2003, 08:29 AM:

there is a post on here somewhere about getting the non-sync through the matrix, have a search

Posted by Aaron Sisemore (Member # 145) on 10-17-2003, 12:23 PM:

That post was here .

-Aaron