Film-Tech Forum ARCHIVE: Error log CP650

This is topic Error log CP650 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005644

Posted by Antonio Marcheselli (Member # 373) on 12-15-2003, 07:02 PM:

Hi

On one of my 650 I have the "video=0.125" error in the error log. The unit is working properly.

What does it means?

Bye
A

Posted by Rick Long Jr (Member # 541) on 12-15-2003, 07:32 PM:

The CP 650 looks at the video amplitude of the SR-D soundhead on startup. If the LED (or EPT lamp) isn't on at startup this will happen. Nothing to worry about.

You could try having the reader on before booting. It should then indicate video strength around 4V.

It does not affect operation though.

Posted by Antonio Marcheselli (Member # 373) on 12-15-2003, 07:37 PM:

Usually our SDR leds are off when powering on the CPs. Why does only one Cp has this warning? Is the check made only on some software releases?

Bye!
A

Posted by Rick Long Jr (Member # 541) on 12-15-2003, 07:40 PM:

I believe it only came in with 2.0.10.8. But I could be wrong. Someone will correct me, I'm sure.

Actually, now that I think of it, it may be 2.1.9.0.
Maybe I've corrected myself.

Posted by Antonio Marcheselli (Member # 373) on 12-15-2003, 07:48 PM:

Ok, that unit is the only one with different software than the others!

Thanks!

Bye
A