Film-Tech Forum ARCHIVE: Disable surround on non sync CP55

This is topic Disable surround on non sync CP55 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005702

Posted by Michael Harlow (Member # 1353) on 01-01-2004, 11:01 AM:

Gents,

I have a CP55 which is giving me non sync on surround as well as L+R behind screen. How can i disable the suuround on non sync?

Thanks....

Posted by Darryl Spicer (Member # 711) on 01-01-2004, 11:16 AM:

On the Cat 243 control logic card there is a J2 jumper that needs to be set to no surrounds in Nonsync position. You will find this jumper in a jumper holder below the J2 jumper position.

Posted by Michael Harlow (Member # 1353) on 01-01-2004, 11:27 AM:

Darryl,

Thanks, job done.

You can always rely on Film-Tech [Smile]

Posted by Steve Kraus (Member # 476) on 01-01-2004, 11:44 AM:

Just out of curiousity, why don't you like the surrounds in non-sync?

Posted by Michael Harlow (Member # 1353) on 01-01-2004, 11:52 AM:

Steve,

Its not that i don't like it, it's because i use the non sync input for PA use as well and when using a mic the delay is of putting, also on certain CD's you get a very odd surround effect. A bit like being in the middle of a football stadium!