Film-Tech Forum ARCHIVE: Simplex 35 Aperture Plate

This is topic Simplex 35 Aperture Plate in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005776

Posted by Ian Bailey (Member # 1752) on 01-19-2004, 08:40 PM:

How do I work out what aperture plate I need to order as the one I have looks like it's been cut with a CHAIN SAW!(projector is a SIMPLEX 35 model 1050)

Posted by Aaron Sisemore (Member # 145) on 01-19-2004, 08:54 PM:

Manual (plate swap) or automatic aperture changer?

-Aaron

Posted by Ian Bailey (Member # 1752) on 01-19-2004, 08:57 PM:

Aaron it is an automatic aperture changer.

Posted by Aaron Sisemore (Member # 145) on 01-19-2004, 09:25 PM:

Strong part P-9654 should be the dual auto aperture plate. It should come under-cut (smaller than normal holes) so you can cut it to the desired size for your screen.

-Aaron

Posted by Ian Bailey (Member # 1752) on 01-19-2004, 10:14 PM:

Thanks Aaron [thumbsup]