Film-Tech Forum ARCHIVE: Opinions wanted

This is topic Opinions wanted in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005868

Posted by Bhaskar Dhungana (Member # 1283) on 02-17-2004, 10:02 PM:

Earlier I had asked what would make a good economical package for sound system in cinema. Since then I have gotten an offer to buy the following equipment. I don't know much about these equipment, therefore I would like your opinion on these. What do you think? I have included the prices with it so that you may be able to make a better judgment.

Processor
Dolby CP - 55 - US$595

Drivers, Horns etc.
SPEAKER-LF DRIVER ALTEC 515B (USED - US$167
SPEAKER-HF DRIVER ALTEC 288-16G (USED) - US$119
SPEAKER-HF DRIVER ALTEC 291A (USED) - US$60
SPEAKER CROSSOVER NETWORK ALTEC N-500F - US$40
SPEAKER HORN-HF (3x5 CELLS) ALTEC H-1505 (USED) - US$101
SPEAKER HORN-HF (2x5 CELLS) ALTEC H-1005 (USED) - US$71
SPEAKER-HF DRIVER ALTEC LU-1104 (USED) - US$71

Amps
AMPLIFIER-POWER DUAL CHANNEL QSC-1400 (USED) - US$125

All the equipment are in reasonably good condition.

Posted by Aaron Sisemore (Member # 145) on 02-17-2004, 10:20 PM:

Good speakers, but I would make sure that the 515's include the bass boxes- From what you are listing it looks like just raw drivers (no boxes).

The CP55 is another good choice, as are the QSC 1400 amps.

-Aaron

Posted by Joe Redifer (Member # 3) on 02-17-2004, 10:52 PM:

Please change the topic so it is not a "teaser" per the forum FAQ or we will change it for you and take away your bonus points.

Posted by Joe Redifer (Member # 3) on 02-18-2004, 02:52 PM:

Well since the topic ne'er changed and I am too lazy to think of one for you, I am gonna lock this thread.