Film-Tech Forum ARCHIVE: Xetron lamphouse dowser

This is topic Xetron lamphouse dowser in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005957

Posted by Ken Lackner (Member # 1002) on 03-16-2004, 12:07 PM:

I need to replace the dowswer on one of our Xetron XCN consoles. I was going to remove the handle from the front of the console so I could pull the dowser blade off inside the lamphouse. I loosened the allen screw, but then I noticed there was that darn pin. How do I get that thing out?

Posted by Daryl C. W. O'Shea (Member # 1303) on 03-16-2004, 12:40 PM:

Plasma cutter.