Film-Tech Forum ARCHIVE: V-belt recommendation for 6000' reel arms...

This is topic V-belt recommendation for 6000' reel arms... in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=005999

Posted by Jon Miller (Member # 163) on 03-27-2004, 10:41 AM:

I am installing a set of Kelmar 6000' reel arms on my projector (Simplex X-L, RCA 9030 SH) and would like to use a readily-available V-belt on the takeup rather than a "Rounthane" belt. Any suggestions on which V-belt size would work?

Thanks!

Posted by Rick Long Jr (Member # 541) on 03-27-2004, 02:10 PM:

Depends on the angle the arm is on, the position of the idler etc....
Simply take a piece of wire or rope and use it to measure the length required and take it to a hardware/automotive store. Some still have that old belt measuring device on the wall for old v-belts.