Film-Tech Forum ARCHIVE: Kintek KT-700

This is topic Kintek KT-700 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006194

Posted by Mike Spaeth (Member # 524) on 05-20-2004, 11:02 AM:

Anyone have a manual for this? I need one pretty badly!

Thanks

Posted by Mark Gulbrandsen (Member # 72) on 05-20-2004, 07:42 PM:

These units are hopeless. The best thing to do with it is to take it to the rifle range and let it have it with a few rounds of 30-06 and then a few shotgun blasts! I actually did that to one once.... You WILL feel much better after it is completely dead.
Mark

Posted by Gordon McLeod (Member # 33) on 05-20-2004, 08:55 PM:

To align it all one was supossed to do was do the slit loss, then the cell current then the cell balance and set house levels there was no eq in it

Posted by Steve Guttag (Member # 268) on 05-21-2004, 06:34 AM:

That isn't exactly true.

The slit-loss EQ didn't work since it was a treble filter rather than a proper sin (x)/x filter.

There are treble and bass tone controls for the various channels that can be adjusted.

Steve

Posted by Mark Gulbrandsen (Member # 72) on 05-21-2004, 08:06 AM:

No matter what it may have its still best to shoot the thing and put it out of its misery... Hey and its alot of fun at the same time [thumbsup]

.

Mark

Posted by Gordon McLeod (Member # 33) on 05-21-2004, 08:31 PM:

Sorry I forgot about those base trebles controls
THe 3 we used to have in town were all wired into CP200's so it was a moot point